Centrifugal Pump Can Not Get Water

Centrifugal pump is most widely used in agriculture due to its simple structure and high efficiency. Sometimes people think centrifugal pump used conveniently, but sometimes it could not get water. We must analysis the reasons carefully.

On the one hand, there is some air in water inlet pipe or pump body. Some customers have not filled with enough water before starting pump. It just looks full. In fact, little air still leave in the pipe or pump body. Pump packing has been worn or pressed too loosen. It has an influence on getting water finally.

On the other hand, the pump speed is too slow. At first, you must install the pump correctly. Two wheel center distance can not too small and the two axis should be parallel. When the drive belt has been worn for a long time, it will easy to slip, and even reduce the pump speed. Sometimes pump itself in mechanical fault may lead to pump speed too slow. For example, fasten nut between impeller and pump shaft is loosening. And friction will be caused by the impeller and pump body directly. So the pump speed will become slow.

Article from: http://www.cnhanjoy.com/news/Centrifugal-Pump-Can-Not-Get-Water.htm

Copper Faucet And Stainless Steel Faucet

Now there are many kinds of faucet materials in the market. Such as PVC, ceramic, stainless steel, copper and so on. Faucets with different material are always with different quality and price. Next we will introduce some comparison of advantages between copper faucets and stainless steel faucets.

At present, 99% percent of high-grade faucets are made of copper domestic  and abroad. Since their high manufacturing cost, they are usually used for area of high grade decoration. Such as stars hotel and luxury villa. Copper is flexibility. So it could produce various kinds of products which are often in novel shape. At the same time, designer would like to blend fashion and beautiful elements on the copper faucet. These faucets could attract many customers.

Stainless steel faucets are environmental and without any lead. Stainless steel has acid resistance and alkali resistance. It will not pollute your water and release any harmful substances. Stainless steel is favor of human health. The surface of stainless steel faucet does not need any electroplate. Its surface could keep silver white luster forever after polishing. However stainless steel faucets are more and more popular in daily life. But copper faucets are also in more appreciation.

Article From: http://www.cnhanjoy.com/news/Copper-Faucet-And-Stainless-Steel-Faucet.htm

Classification Of Bathroom Faucets

At present, there are many kinds of valve core in bathroom faucets market. Such as brass ball valve, ceramic valve, steel ball valve and axle rolling type valve. These are all easy to be installed, repaired and changed. As we all known, the key to faucet quality is valve. Bathroom faucets with rubber core are mostly cast iron faucet with spiral type. But now they have been eliminated.

Steel ball valve always own high technology. It is special suit for the place which in bad water quality. Because valve will not be affected by impurities in the water. The service life of valve will also not be shorten. The handle of steel ball valve has a large angle for adjusting water temperature. With this large angle, we can control the water temperature accurately. At the same time, the hot water would get out quickly. It means that steel ball valve is in energy saving. However axle rolling type valve also have many advantages, such as feeling comfortable, aging resistance and abrasion resistance.

Our brass ball valves are all in high quality. You can shut off the bathroom faucet quickly with our good brass ball valves since the simple design of our brass ball valves.

 Bathroom Faucet

 Brass Ball Valve

Article From: http://www.cnhanjoy.com/news/Classification-Of-Bathroom-Faucets.htm

Matching Principle For Basin Faucet

Now more and more people is aware of importance of basin faucet in family decoration. At present, many brands of faucet have their own designing styles. Customers can buy basin faucet according to their preferences and kitchen style.

In our daily life, people is habit of considering the collocation of basin faucets and sanitary ware. The most important is the model should be matched. Otherwise it will bring many trouble, such as leakage. Besides the styles and colors must be matched. If your bathroom gives priority to with cool color, you can choose a silver basin faucet. However it gives priority to with warm color, you can choose a golden one. Sometimes the total bathroom has complex style, you may get a milky white basin faucet.

In fact, with the development of technology, basin faucet styles have been changed again and again. But there is a matching rule. On the glass table, we will suggest getting a straight faucet. Kitchen sink needs a curved leading which own a long mouth. Ceramic basin is suit for double handle basin faucet with a long mouth. Certainly if you are pursuit of fashion, you may choose a ceramic basin.

Article From: http://www.cnhanjoy.com/news/Matching-Principle-For-Basin-Faucet.htm